*How To Roll And Tuck
To roll and tuck the dough, push the dough to one side of the bowl or turn it onto a lightly floured work surface. Coax it into a somewhat rectangular shape with a short end facing you. Slide your fingers or scraper 3 inches (8 centimeters) under the far end of the dough and lift it up. Roll it towards you, allowing it to fold onto the rest of the dough, and then push down lightly with the side of your hand, tucking the folded-over end into the mass of dough. Repeat several times until the dough is all rolled up, giving a slight push down on the last roll to leave the dough seam side down. Rotate the dough 90 degrees so the short side is once again facing you. Flip it over, seam side up, and press gently on the seam with your palm hand or the flat side of a scraper to create a roughly rectangular shape, adding the reserved last 1/6 of the flour mixture and, if needed, a small amount of additional all-purpose flour to the bowl or work surface and your hands as needed if the dough is sticky. You should have 3 or 4 rolls along the length of dough. That is one roll and tuck. If the dough is quite sticky at first, have patience, it will strengthen and become more manageable with each roll and tuck. As the dough strengthens, you’ll notice that it begins to resist further rolling. A general rule of thumb is that when the dough becomes difficult to fold and begins to tear, it’s time to stop. Continue rolling and tucking until the dough until it begins to resist any further rolling, about 10 complete roll and tucks.